What paperwork comes with your parts?

Every part ships with AS9100 and AS9120 documentation, plus manufacturer certificates and material traceability. We share all of this with your quote, not after you have already paid.

How fast can you get me a quote?

Most requests get a response within 24 hours. If you have an unplanned outage, let us know and we will try to turn it around the same day.

Do you ship outside the US?

Yes, we ship to over 150 countries. We handle the export paperwork for turbine and control system components, including items with dual-use restrictions.

What is a CAGE code and why does it matter?

It is a unique ID for the manufacturer or supplier of a part, used in defense and government procurement. For turbine buyers, it confirms you are getting the part from the company that actually made it, not a lookalike from some unverified source.

How do you stop counterfeit parts?

Every part goes through inspection and documentation checks before it ships. If we cannot verify where a part came from, we do not stock it, no matter how badly someone needs it.

Can you find obsolete or discontinued parts?

That is actually where we do our best work. Legacy Mark V control cards, discontinued combustion hardware, older Speedtronic components. Our network of 1,200 suppliers means we can often find parts that other distributors have given up on.

Gas Turbine Parts

GE Frame 7FA Parts — MS7001FA Platform

Complete hot gas path, combustion, and turbine components for the 171 MW class GE Frame 7FA heavy-duty gas turbine. ISO 9001 & AS9120 certified.

Frame Overview

171 MW Class Heavy-Duty Gas Turbine

The GE Frame 7FA (MS7001FA) is a 171 MW, 60 Hz heavy-duty gas turbine widely deployed in simple cycle, combined cycle, and cogeneration plants across North America, the Middle East, and Asia-Pacific. With an 18-stage compressor and 3-stage turbine, the 7FA platform delivers a heat rate of approximately 9,600 Btu/kWh (LHV) and supports DLN 2.6+ combustion for ultra-low NOx emissions.

Common build levels include 7FA.e, 7FA.05, 7FA.04, and 7FA.03. Our inventory covers all major variants with OEM-licensed and aftermarket-certified components backed by full traceability.

Specifications

Model: MS7001FA (7FA)
Power Output: 171 MW (ISO, simple cycle)
Frequency: 60 Hz
Heat Rate: ~9,600 Btu/kWh (LHV, simple cycle)
Combustor Type: DLN 2.6+ (can-annular, 18 burners)
Turbine Stages: 3
Compressor Stages: 18
Platform: 7FA.e, 7FA.05, 7FA.04, 7FA.03
Applications: Simple cycle, combined cycle, cogeneration

Parts Catalog

Complete GE Frame 7FA Parts Table

Comprehensive inventory covering hot gas path, combustion, and turbine hardware for all 7FA build levels.

Hot Gas Path — Buckets

Part	Description
Stage 1 Bucket	Directionally solidified superalloy, TBC-coated, fir tree root attachment. Available with cooling hole configurations for 7FA.e and 7FA.05.
Stage 2 Bucket	Equiaxed or DS material options, integral tip shroud, multi-pass internal cooling circuit.
Stage 3 Bucket	Longer airfoil design for low-pressure extraction, corrosion-resistant coatings available.

Hot Gas Path — Nozzles

Part	Description
Stage 1 Nozzle	Single-vane segment design, film-cooled, cobalt-base superalloy with TBC. Includes inner/outer sidewalls and rail seals.
Stage 2 Nozzle	Two-vane segment, convective and film cooling, platform with angel wing seals.
Stage 3 Nozzle	Two-vane segment, convective cooling, ruggedized for extended hot gas path intervals.

Combustion Hardware

Part	Description
Transition Piece	One-piece, single-tube design with impingement cooling sleeve and cross-fire tube connection for DLN combustion systems.
Combustion Liner	Advanced can-annular liner for DLN 2.6+ combustion system. Multi-hole primary zone for premixed flame stability.
Fuel Nozzle (DLN 2.6+)	Premixed fuel nozzle assembly with cartridge and tip. OEM equivalent flow number and spray pattern.
Cross-Fire Tubes	Flame propagation tubes with retention hardware. Inconel 625 construction.

Shrouds, Seals & Hardware

Part	Description
Stage 1 Shroud	Turbine shroud block, honeycomb land, HGP compliant, with full set of feather seals and pin hardware.
Stage 2 Shroud	Shroud segments with abradable coating, spring clips and retention hardware included.
Stage 3 Shroud	Exhaust-end shroud blocks, standard and oversized bore configurations.
Seal Kits	Complete seal retrofit kits including interstage, brush, labyrinth, and carbon ring seals.
Retention Hardware	Locking plates, pins, clips, bolts, and nuts per GE specification GEK-107121 and GEK-110472.

Why Us

Why Choose Us for 7FA Parts

Certified quality, deep inventory, and engineering expertise purpose-built for the GE Frame 7FA platform.

Deep 7FA Inventory

Over 5,000 unique 7FA line items in stock across buckets, nozzles, combustion hardware, and seals. Same-day dispatch for in-stock orders.

Certified & Traceable

ISO 9001:2015 and AS9120 Rev B certified. Every 7FA part ships with full chain-of-custody documentation, OEM cross-reference, and material certs.

24-Hour Quotes

Submit your RFQ and receive a binding quote within 24 hours. AOG emergency requests routed directly to our 7FA product specialists.

Technical Matching

Our engineers cross-reference OEM part numbers against 7FA.e, 7FA.05, and legacy 7FA build levels to ensure form-fit-function match.

OEM Equivalent Quality

All 7FA hardware sourced from OEM-licensed manufacturers and NADCAP-approved coating houses. No grey-market or uncertified alternatives.

Field Support

Backed by a team of former GE field engineers who understand outage schedules, bolting torques, and installation sequencing.

Get a Quote

Need GE Frame 7FA Parts?

Submit your part numbers or NSNs for a competitive quote within 24 hours. AOG and emergency outage requirements handled same-day.

Request 24-Hour Quote